Techno-Control Cybernetic: Resistance Welding Technologies

Controller & machinery manufacturer for the resistance welding industry (spot weld)

About us Welding controllers Resistance welders Parts Services

ALPHA Welding Control
The ALPHA welding control unit can be incorporated in a new resistance welding machine or can be used as a replacement (upgrade) unit for your old controller and this at very low cost. [To read more, click on picture]

GAMMA-2 Welding Control
Readily adjusts to accommodate all types of single phase resistance welding equipment, including: rocker, press, seam, butt, flash butt, brazing, gun, robotic equipment and special welding applications. [To read more, click on picture]

Electrodes, coppers and other parts
Techno-Control Cybernetic is a distributor of electrodes and electrode holders from many copper supply manufacturer. Our qualified staff will gladly guide you through the wide variety of suitable replacement parts for your equipment. [To read more, click on picture]

Technical and consulting services
Our experience and knowledge of the spot welding process are at your service to help solve any type of problems or to increase the performance of your equipment. [To read more, click on picture]

Remanufactured resistance welders
Techno-Control Cybernetic completely remanufactures all types of resistance welding machines. We acquired our excellent reputation by the quality and reliability of our products. [To read more, click on picture]

Rocker type spot welders
The rocker arm type is the most commonly used stationary resistance welding machine. The upper arm is pivoted at the top front of the frame. The lower arm is usually mounted horizontally and can generally be adjusted on a front vertical column for work clearance. [To read more, click on picture]

Seam welders
A standard Seam Welder is usually built on a press type welder frame, but the upper and lower electrode holders or platens are replaced with welding wheels mounted on shafts rotating in current carrying bearings. These wheels are driven by motor gear. [To read more, click on picture]

Suspended Gun type spot welders
Suspended gun type spot welders are used for their mobility and their ease of movements for large or complex assemblies. The gun type welder can be mounted on a balancer to ease the vertical movements and on an overhead travelling crane for horizontal movements. [To read more, click on picture]

Butt and flash-butt welders
Butt welders are used for welding parts end-to-end, usually metal wires. It uses electrode-clamps that hold the parts and inject current until the point of fusion of the materials. It then brings the parts together to be joined. [To read more, click on picture]

Capacitive discharge and micro welders
Capacitive Discharge spot welders are one of the most cost-effective welding solutions for fine-spot resistance welding. Whether you are manufacturing battery packs or microscopic assemblies, Capacitive Discharge spot welders are the most affordable, precision fine-spot resistance welders on the market. [To read more, click on picture]

Wire bending and welding machines
[Read more...]

Custom resistance welding machines
We offer a custom design service that can create a specifically built resistance-welding machine for your applications. Our team has the qualifications and experience to design and manufacture automated or semi-automated equipment tailored to your needs. [To read more, click on picture]

Resistance welding course
The welding industry has requested a resistance welding training program. Education will lead to improved quality. Techno-Control Cybernetic has developed a four hour resistance welding course covering the following subjects... [To read more, click on picture]

English | Français

Search site

In association with

Newsletter Item [ back ]

Date: 2009-01-06 16:47:53

Techno-Control Cybernetic - Dec. 2006

[VERSION FRANÇAISE]

NEWSLETTER - December 2006 Edition

Techno-Control Cybernetic has revamped its website!

It's finally done! We have launched our newly revamped website at http://www.techno-control.com/

We take this opportunity to tell you about some of the improvements you will find in our website.

OUR INVENTORY: You can now access some of the resistance welding machines that we have in store. Some are used and some are new… and some are even blue. If you don't find what you are looking for in our inventory, please contact us. We will be glad to help.
OUR FREQUENTLY ASKED QUESTIONS (FAQ): If you have a question and consider that it should be added to our FAQ, please send it to us by using the form in the CONTACT US page. We'll be glad to answer it… well, if it's not too personal.
This NEWSLETTER: We are glad to start this Newsletter to help you get the most out of your resistance welding equipment. We will publish our special activities, new products and services and even our monthly promotions.

And there is more to come. Simply stay connected to this newsletter to be informed.

Techno-Control Cybernetic: A new plant in Ontario

Techno-Control Cybernetic is proud to announce its production activities in Ontario. The plant, situated in Bolton (Ontario) in Metalex Products' building, is directed by Mr Volker Kreibe. We are happy to welcome Mr Kreibe and his team in the Techno-Control Cybernetic's family.

[Contact information]

TCC Banner Exchange Program

Techno-Control Cybernetic is starting a Banner Exchange Program with its clients. We have created a space called "Our partners" on the front-page of our website that enables us to publish banners of a maximum size of 175 pixels by 175 pixels. The idea behind this program is obviously to exchange so that we will get as much visitors from each other's websites. It's FREE to join. But you must accept to publish our banner, of the size you specify, on your website linked to our website. If you are interested in our Banner Exchange Program, please CONTACT US.

OUR MONTHLY PROMOTION: DECEMBER 2006

With the purchase of 350.00$ (CAD) of electrodes, get copper paste (225ml) for FREE.

You must mention this promotion when ordering. Contact us to order.

[Read on the web]

INFOLETTRE - Édition Décembre 2006

Techno-Control Cybernetic lance son nouveau site web!

C’est fait! Nous avons lancé notre nouveau site web. www.techno-control.com

Vous trouverez plusieurs améliorations intéressantes:

NOTRE INVENTAIRE : Vous pouvez maintenant accéder à la liste des soudeuses par résistance que nous avons en inventaire. Certaines machines sont neuves et d’autres sont usagées. Si vous ne trouvez pas ce dont vous avez besoin dans notre inventaire, il nous fera plaisir de vous aider. Contactez-nous!
LA FOIRE AUX QUESTIONS (FAQ) : Si vous avez des questions relatives à nos produits ou services ou même des questions techniques liées à la soudure par résistance, il nous fera plaisir d’y répondre et d’évaluer la pertinence de l’ajouter à la FAQ. Vous n’avez qu’à nous écrire en utilisant le formulaire situé dans la page CONTACTEZ-NOUS.
Cette INFOLETTRE: Nous sommes heureux de débuter cette Infolettre pour vous aider à obtenir davantage de vos équipements de soudure par résistance. Nous publierons nos activités spéciales, nos nouveaux produits et services et même nos promotions mensuelles.

Et nous prévoyons d’autres surprises d’ici peu. Vous n’avez qu’à rester à l’écoute de notre Infolettre pour en être informé.

Techno-Control Cybernetic: Une nouvelle usine en Ontario

Techno-Control Cybernetic est fier d’annoncer ses activités de production en Ontario. L’usine, située à Bolton (Ontario) dans les locaux de Metalex Products, est dirigée par Monsieur Volker Kreibe. Nous sommes heureux de souhaiter la bienvenue à M. Kreibe et à son équipe au sein de la famille Techno-Control Cybernetic.

[Information de contact]

Programme d’échange de bannières TCC

Techno-Control Cybernetic débute un Programme d’échange de bannières avec ses clients. Nous avons créé un espace intitulé « Nos partenaires » sur la page d’accueil de notre site web. Cet espace est réservé à la publication de logos ou de bannières publicitaires pour nos clients d’un taille maximale de 175 pixels par 175 pixels. L’objectif de ce programme est bien sûr d’échanger l’audience qui visite nos sites web réciproques. Ce programme est gratuit. Mais évidemment vous devez accepter de publier notre bannière, de la taille qui correspond aux spécificités de votre site web, liée au site web de Techno-Control Cybernetic. Veuillez nous contacter si vous êtes intéressé à participer à notre Programme d’échange de bannières.

NOTRE PROMOTION DU MOIS : DÉCEMBRE 2006

À l'achat de 350.00$ (CAD) d'électrodes, obtenez GRATUITEMENT de la pâte de cuivre (225ml). Il faut mentionner cette promotion lors de votre commande. Contactez-nous pour commander.

[Plus de détails]

About us Welding controllers Resistance welders Parts Services

Home All our News Our inventory Documentation FAQ Newsletter Multimedia Gallery Contact us

DISCLAIMER RETURN MERCHANDISE POLICY