Controller & machinery manufacturer for the resistance welding industry (spot weld)

Techno-Control Cybernetic Inc
About us Welding controllers Resistance welders Parts Services
Contact us Our history Our management team Message from our president Job opportunities
ALPHA Welding Control ALPHA Welding Control
The ALPHA welding control unit can be incorporated in a new resistance welding machine or can be used as a replacement (upgrade) unit for your old controller and this at very low cost. [To read more, click on picture]
GAMMA-2 Welding Control GAMMA-2 Welding Control
Readily adjusts to accommodate all types of single phase resistance welding equipment, including: rocker, press, seam, butt, flash butt, brazing, gun, robotic equipment and special welding applications. [To read more, click on picture]
Electrodes, coppers and other parts Electrodes, coppers and other parts
Techno-Control Cybernetic is a distributor of electrodes and electrode holders from many copper supply manufacturer. Our qualified staff will gladly guide you through the wide variety of suitable replacement parts for your equipment. [To read more, click on picture]
Technical and consulting services Technical and consulting services
Our experience and knowledge of the spot welding process are at your service to help solve any type of problems or to increase the performance of your equipment. [To read more, click on picture]
Remanufactured resistance welders Remanufactured resistance welders
Techno-Control Cybernetic completely remanufactures all types of resistance welding machines. We acquired our excellent reputation by the quality and reliability of our products. [To read more, click on picture]
Rocker type spot welders Rocker type spot welders
The rocker arm type is the most commonly used stationary resistance welding machine. The upper arm is pivoted at the top front of the frame. The lower arm is usually mounted horizontally and can generally be adjusted on a front vertical column for work clearance. [To read more, click on picture]
Seam welders Seam welders
A standard Seam Welder is usually built on a press type welder frame, but the upper and lower electrode holders or platens are replaced with welding wheels mounted on shafts rotating in current carrying bearings. These wheels are driven by motor gear. [To read more, click on picture]
Suspended Gun type spot welders Suspended Gun type spot welders
Suspended gun type spot welders are used for their mobility and their ease of movements for large or complex assemblies. The gun type welder can be mounted on a balancer to ease the vertical movements and on an overhead travelling crane for horizontal movements. [To read more, click on picture]
Butt and flash-butt welders Butt and flash-butt welders
Butt welders are used for welding parts end-to-end, usually metal wires. It uses electrode-clamps that hold the parts and inject current until the point of fusion of the materials. It then brings the parts together to be joined. [To read more, click on picture]
Capacitive discharge and micro welders Capacitive discharge and micro welders
Capacitive Discharge spot welders are one of the most cost-effective welding solutions for fine-spot resistance welding. Whether you are manufacturing battery packs or microscopic assemblies, Capacitive Discharge spot welders are the most affordable, precision fine-spot resistance welders on the market. [To read more, click on picture]
Wire bending and welding machines Wire bending and welding machines
[Read more...]
Custom resistance welding machines Custom resistance welding machines
We offer a custom design service that can create a specifically built resistance-welding machine for your applications. Our team has the qualifications and experience to design and manufacture automated or semi-automated equipment tailored to your needs. [To read more, click on picture]
Resistance welding course Resistance welding course
The welding industry has requested a resistance welding training program. Education will lead to improved quality. Techno-Control Cybernetic has developed a four hour resistance welding course covering the following subjects... [To read more, click on picture]
Home
All our News
Our inventory
Documentation
FAQ
Newsletter
Multimedia Gallery
Contact Us
In association with
REAI
RWMA
CWA
AWS
CSA

http://www.techno-control.com

Newsletter Item  [ back ]
Date: 2012-12-11 14:33:47
Techno-Control Cybernetic - Décembre/December 2012

[READ THE ENGLISH VERSION BELOW]


www.techno-control.com


INFOLETTRE - Édition Décembre 2012




Meilleurs voeux et horaire des fêtes

À l’arrivée du temps des fêtes, nous faisons un retour sur l’année qui vient de passer et nos pensées se tournent avec gratitude vers ceux et celles qui nous ont permis de toujours aller de l’avant.

C’est dans cet état d’esprit que nous disons…

Merci, Joyeuses Fêtes et Bonne et Heureuse Année!

Veuillez prendre note que nos bureaux et l’usine seront fermés pour la période des Fêtes à partir du 21 décembre à midi. Nous serons de retour pour vous servir le jeudi 3 janvier 2013.

N’OUBLIEZ-PAS : Appelez-nous aussitôt que possible si vous devez commander des électrodes ou autres pièces en prévision de cette période.


Numéro de produit : PC–968La pâte conductrice de cuivre haute température pour la soudure par résistance, vous connaissez?

Numéro de produit : PC–968
Quantité : 225mL

Avantages

  • Peut être utilisé sur tout contact électrique
  • Améliore la conductivité
  • Réduit les dommages au retrait des électrodes de leurs supports
  • Aide à éliminer les fuites d’eau
  • Résiste à la chaleur
  • Prévient la contamination des joints électriques
  • Réduit les coûts d’entretien

N'hésitez pas à nous contacter pour plus de détails concernant la pâte de cuivre.


Économisez sur vos électrodes!

Profitez de prix avantageux avec un arrangement en « Commande permanent ou ouverte » (« blanket order »). En planifiant à l’avance votre consommation d’électrodes pour une année, vous pouvez profiter des tarifs pour des quantités supérieures. Ainsi, nous pourrons vous expédier aux 60 jours la portion d’électrodes prévue pour la période ou demander qu’une portion plus large soit expédiée (selon le besoin et à l’intérieur de la limite annuelle fixée). Communiquez avec nous pour connaître toutes les conditions de cette offre.


Principes de base pour un soudage par résistance de qualité, par J-P Derdeyn

Principes de base pour un soudage par résistance de qualité, par J-P Derdeyn


Venez lire cet article publié par "Produits pour l'Industrie Québécoise" dont l'auteur est Jean-Pierre Derdeyn, président de Techno-Control Cybernetic inc.

http://piq.clbmedia.dgtlpub.com/2012/2012-09-30/home.php?page_view=8

N'hésitez pas à nous transmettre vos commentaires sur cet article et des suggestions pour de futurs sujets d'articles.



Accueil | Contrôleurs de soudure | Soudeuses | Pièces | Services
Toutes nos nouvelles | Notre inventaire | Demander soumission | Documentation | FAQ | Infolettre | Galerie multimédia | Contactez-nous


 www.techno-control.com


NEWSLETTER - December 2012 Edition




Holidays' wishes and office hours

At the Holiday Season, our thoughts turn gratefully to those who have made our progress possible.

It is in this spirit we say…

Thank You and Best Wishes for the Holidays and a Happy New Year!

We would like to take this opportunity to announce that we will be closed during the Holidays from December 21st at noon. We will be back to serve you on Thursday January 3rd, 2013.

IMPORTANT REMINDER: If you need to order electrodes or other parts, please plan ahead and call us as soon as possible.


Product number: PC–968Do you know about high temperature conductive copper paste for resistance welding?

Product number: PC–968
Quant.: 225mL

Features

  • Can be used on all electrical contact
  • Improves electrical conductivity
  • Reduces damage and scoring from electrode removal of holders
  • Helps reduce water leakage at holders
  • Heat resistant
  • Helps prevent electrical joint contamination
  • Reduces maintenance cost

Contact us to know more about our copper paste.


Save on your electrodes!

Take advantage of special prices when signing for a "blanket order" contract. By planning your yearly consumption of electrodes, you can get better prices for higher quantities. This way, we can ship every 60 days your portion of electrodes for that period or you could request that a larger amount be shipped (based on your need and within your yearly limit). Call us to get more details regarding this offer.


Basic principles in resistance welding, By JP Derdeyn, published in the magazine PIQ

Principes de base pour un soudage par résistance de qualité, par J-P Derdeyn

Come and read this article published by "Produits pour l'Industrie Québecoise" written by Jean-Pierre Derdeyn, president of Techno-Control Cybernetic inc.

http://piq.clbmedia.dgtlpub.com/2012/2012-09-30/home.php?page_view=8

Please send us your comments regarding this article and your suggestions for future topics.



Home | Welding controllers | Resistance welders | Parts | Services
All our News | Our inventory | Quote request | Documentation | FAQ | Newsletter | Multimedia Gallery | Contact us


Copyright © 2012 Techno-Control Cybernetic Inc, All rights reserved/Tous droits réservés.

Powered by Letterman

Your Resistance Welding Partner

About us Welding controllers Resistance welders Parts Services
Home All our News Our inventory Documentation FAQ Newsletter Multimedia Gallery Contact us
DISCLAIMER RETURN MERCHANDISE POLICY
Copyright © 2013 Techno-Control Cybernetic Inc, All rights reserved/Tous droits réservés.
Webdesign: Denis Labrosse.