Controller & machinery manufacturer for the resistance welding industry (spot weld)

Techno-Control Cybernetic Inc
About us Welding controllers Resistance welders Parts Services
Electrodes and coppers Other related parts High temperature conductive copper paste Tip dresser Cooling units
ALPHA Welding Control ALPHA Welding Control
The ALPHA welding control unit can be incorporated in a new resistance welding machine or can be used as a replacement (upgrade) unit for your old controller and this at very low cost. [To read more, click on picture]
GAMMA-2 Welding Control GAMMA-2 Welding Control
Readily adjusts to accommodate all types of single phase resistance welding equipment, including: rocker, press, seam, butt, flash butt, brazing, gun, robotic equipment and special welding applications. [To read more, click on picture]
Electrodes, coppers and other parts Electrodes, coppers and other parts
Techno-Control Cybernetic is a distributor of electrodes and electrode holders from many copper supply manufacturer. Our qualified staff will gladly guide you through the wide variety of suitable replacement parts for your equipment. [To read more, click on picture]
Technical and consulting services Technical and consulting services
Our experience and knowledge of the spot welding process are at your service to help solve any type of problems or to increase the performance of your equipment. [To read more, click on picture]
Remanufactured resistance welders Remanufactured resistance welders
Techno-Control Cybernetic completely remanufactures all types of resistance welding machines. We acquired our excellent reputation by the quality and reliability of our products. [To read more, click on picture]
Rocker type spot welders Rocker type spot welders
The rocker arm type is the most commonly used stationary resistance welding machine. The upper arm is pivoted at the top front of the frame. The lower arm is usually mounted horizontally and can generally be adjusted on a front vertical column for work clearance. [To read more, click on picture]
Seam welders Seam welders
A standard Seam Welder is usually built on a press type welder frame, but the upper and lower electrode holders or platens are replaced with welding wheels mounted on shafts rotating in current carrying bearings. These wheels are driven by motor gear. [To read more, click on picture]
Suspended Gun type spot welders Suspended Gun type spot welders
Suspended gun type spot welders are used for their mobility and their ease of movements for large or complex assemblies. The gun type welder can be mounted on a balancer to ease the vertical movements and on an overhead travelling crane for horizontal movements. [To read more, click on picture]
Butt and flash-butt welders Butt and flash-butt welders
Butt welders are used for welding parts end-to-end, usually metal wires. It uses electrode-clamps that hold the parts and inject current until the point of fusion of the materials. It then brings the parts together to be joined. [To read more, click on picture]
Capacitive discharge and micro welders Capacitive discharge and micro welders
Capacitive Discharge spot welders are one of the most cost-effective welding solutions for fine-spot resistance welding. Whether you are manufacturing battery packs or microscopic assemblies, Capacitive Discharge spot welders are the most affordable, precision fine-spot resistance welders on the market. [To read more, click on picture]
Wire bending and welding machines Wire bending and welding machines
[Read more...]
Custom resistance welding machines Custom resistance welding machines
We offer a custom design service that can create a specifically built resistance-welding machine for your applications. Our team has the qualifications and experience to design and manufacture automated or semi-automated equipment tailored to your needs. [To read more, click on picture]
Resistance welding course Resistance welding course
The welding industry has requested a resistance welding training program. Education will lead to improved quality. Techno-Control Cybernetic has developed a four hour resistance welding course covering the following subjects... [To read more, click on picture]
Home
All our News
Our inventory
Documentation
FAQ
Newsletter
Multimedia Gallery
Contact Us
In association with
REAI
RWMA
CWA
AWS
CSA

http://www.techno-control.com

Water Cooling Units Print E-mail

Techno-Control Cybernetic sells different types of water cooling units for different sizes of resistance welders. Here are the Dynaflux units and their specifications. Don't hesitate to contact us if you have questions or if you need more details.

MIG

300 AMPS 500 AMPS 750 AMPS 800 AMPS 1000 AMPS 1500 AMPS
TIG 300 AMPS 500 AMPS 750 AMPS 800 AMPS 1000 AMPS 1500 AMPS
PLASMA   150 AMPS 200 AMPS 200 AMPS 300 AMPS  
INDUCTION     5 KW 7,5 KW 10 KW 15 KW
RESISTANCE WELDERS 40 KVA 60 KVA 75 KVA 100 KVA 150 KVA 300 KVA
DYNAFLUX UNITS
ProCool II V/G & VH 1000 V/G            
R1000            
R1100 V/G            
R1200 V/G            
R2000            
R2200 V            
R4000            

ProCool II V/G


PROCOOL II V/G
Water Recirculating Cooling System
PCIIV/PCIIG
The PCIIV/PCIIG Cooling System is designed for:
MIG GUNS: up to 500 amps
TIG TORCHES: up to 500 amps
RESISTANCE WELDERS: up to 60 KVA
PCIIV/PCIIG Specifications:
Available with VANE pump (PCIIV) or GEAR pump (PCIIG)
Factory set at 50 psi adjustable to 80 psi
3 gallon reservoir / 1.8 gpm
115 or 230 vac. Single phase 50/60 Hz
12,000 BTU
Dimensions: 18"L x 14"W x 9"H
5/8 LH Std. Inert Gas fittings - 1/4 FPT
8 foot power cord
Visible water level through tank
Thermal Overload
Net Wt. 37 lbs. / 17 kg
Foam Packed for UPS Shipment
Use Dynaflux DEFENSE Anti-Freeze & Pump Lubricant

VH 1000 V/G

VH1000V/G Water Recirculating Cooling System with Gear Pump VH1000V/VH1000G
The VH1000 Cooling System is designed for:
MIG GUNS: up to 500 amps
TIG TORCHES: up to 500 amps
PLASMA WELDERS: up to 150 amps
RESISTANCE WELDERS: up to 60 KVA
VH1000 Specifications:
Available with VANE pump (VH1000V) or GEAR pump (VH1000G)
Factory set at 50 psi adjustable to 80 psi
2 gallon reservoir / 1.8 gpm
115 or 230 vac. Single phase 50/60 Hz
12,000 BTU
Dimensions: 9"L x 9"W x 26"H
5/8 LH Std. Inert Gas fittings - 1/4 FPT
8 foot power cord
Visible water level through tank
Thermal Overload
Net Wt. 33 lbs. / 15 kg
Foam Packed for UPS Shipment
Use Dynaflux DEFENSE Anti-Freeze & Pump Lubricant

R1000

R1000
Water Recirculating Cooling System
R1000
The R1000 Cooling System is designed for:
MIG GUNS: up to 750 amps
TIG TORCHES: up to 750 amps
PLASMA WELDERS: up to 200 amps
RESISTANCE WELDERS: up to 75 KVA
INDUCTION WELDING: up to 5 KW
R1000 Specifications:
Factory set at 50 psi adjustable to 80 psi
3 gallon reservoir / 1.8 gpm
115 or 230 vac. Single phase 50/60 Hz
15,000 BTU
Dimensions: 23"L x 11"W x 14.75"H
5/8 LH Std. Inert Gas fittings - 1/4 FPT
8 foot power cord
Visible water level through tank
Thermal Overload
Net Wt. 42 lbs. / 19 kg
Foam Packed for UPS Shipment
Use Dynaflux DEFENSE Anti-Freeze & Pump Lubricant

R1100 V/G

R1100V/G Water Recirculating Cooling System
R1100V/G
The R1100 Cooling System is designed for:
MIG GUNS: up to 750 amps
TIG TORCHES: up to 750 amps
PLASMA WELDERS: up to 200 amps
RESISTANCE WELDERS: up to 75 KVA
INDUCTION WELDING: up to 5 KW
R1100 Specifications:
Available with VANE pump (R1100V) or GEAR pump (R1100G)
Factory set at 50 psi adjustable to 80 psi
3 gallon reservoir / 1.8 gpm
115 or 230 vac. Single phase 50/60 Hz
15,000 BTU
Dimensions: 23"L x 11"W x 14.75"H
5/8 LH Std. Inert Gas fittings - 1/4 FPT
8 foot power cord
Visible water level through tank
Thermal Overload
Net Wt. 42 lbs. / 19 kg
Foam Packed for UPS Shipment
Use Dynaflux DEFENSE Anti-Freeze & Pump Lubricant

R1200 V/G

R1200V/G Water Recirculating Cooling System
R1200V/G
The R1200 Cooling System is designed for:
MIG GUNS: up to 800 amps
TIG TORCHES: up to 800 amps
PLASMA WELDERS: up to 200 amps
RESISTANCE WELDERS: up to 75 KVA
INDUCTION WELDING: up to 7.5 KW
R1200 Specifications:
Available with VANE pump (R1200V) or GEAR pump (R1200G)
Factory set at 50 psi adjustable to 80 psi
10 gallon reservoir / 1.8 gpm
115 or 230 vac. Single phase 50/60 Hz
15,000 BTU
Dimensions: 23"L x 11"W x 20"H
5/8 LH Std. Inert Gas fittings - 1/4 FPT
8 foot power cord
Visible water level through tank
Thermal Overload
Net Wt. 48 lbs. / 22 kg
Foam Packed for UPS Shipment
Use Dynaflux DEFENSE Anti-Freeze & Pump Lubricant

R2000

R2000 Water Recirculating Cooling System with GEAR Pump
R2000
The R2000 Cooling System is designed for:
MIG GUNS: up to 1000 amps
TIG TORCHES: up to 1000 amps
PLASMA WELDERS: up to 300 amps
RESISTANCE WELDERS: up to 150 KVA
INDUCTION WELDING: up to 10 KW
R2000 Specifications:
Factory set at 50 psi adjustable to 80 psi
6 gallon reservoir / 3.5 gpm
115 or 230 vac. Single phase 50/60 Hz
230/190 vac 50/60 Hz 3 phase
460/380 vac 50/60 Hz 3 phase
30,000 BTU
Dimensions: 23"L x 16"W x 19.5"H
5/8 LH Std. Inert Gas fittings - 1/4 FPT
8 foot power cord
Visible water level through tank
Thermal Overload
Net Wt. 68 lbs. / 31 kg
Use Dynaflux DEFENSE Anti-Freeze & Pump Lubricant

R2200 V

R2200V Water Recirculating Cooling System with VANE Pump R2200V
The R2200V Cooling System is designed for:
MIG GUNS: up to 1000 amps
TIG TORCHES: up to 1000 amps
PLASMA WELDERS: up to 300 amps
RESISTANCE WELDERS: up to 150 KVA
INDUCTION WELDING: up to 10 KW
R2200V Specifications:
Factory set at 50 psi adjustable to 125 psi
15 gallon reservoir / 4.0 gpm
115 or 230 vac. Single phase 50/60 Hz
30,000 BTU
Dimensions: 23"L x 16"W x 25.5"H
5/8 LH Std. Inert Gas fittings - 1/4 FPT
8 foot power cord
Visible water level through tank
Thermal Overload
Net Wt. 70 lbs. / 32 kg
Foam Packed for UPS Shipment
Use Dynaflux DEFENSE Anti-Freeze & Pump Lubricant

R4000

R4000 Water Recirculating Cooling System with Gear Pump
R4000
The R4000 Cooling System is designed for:
MIG GUNS: up to 1500 amps
TIG TORCHES: up to 1500 amps
PLASMA WELDERS: up to 300 amps
INDUCTION WELDING: up to 15 KW
R4000 Specifications:
Factory set at 50 psi adjustable to 100 psi
25 gallon reservoir / 10.0 gpm
115 or 230 vac. Single phase 50/60 Hz
230/190 vac 50/60 Hz 3 phase
460/380 vac 50/60 Hz 3 phase
55,000 BTU
Dimensions: 36"L x 19.5"W x 35"H
1/2 NPT SS Pipe
Visible water level through tank
Thermal Overload
Net Wt. 170 lbs. / 77 kg

DEFENSE Anti-freeze and Pump Lubricant

DEFENSE
Anti-freeze and Pump Lubricant
DF929
DEFENSE provides year round protection for Dynaflux water coolers and other closed loop water recirculators. DEFENSE protects from freezing to -30 degrees F. A dilution of two parts DEFENSE to one part water protects to -10 F. A dilution of one part DEFENSE to one part water protects to +10 F. DEFENSE reduces water evaporation; therefore less water fill maintenance is required. Lubricates pump to help prevent pump wear.
NOTE: Plasma Compatible
Use of automotive anti-freeze voids warranty and shortens pump life.

Your Resistance Welding Partner

About us Welding controllers Resistance welders Parts Services
Home All our News Our inventory Documentation FAQ Newsletter Multimedia Gallery Contact us
DISCLAIMER RETURN MERCHANDISE POLICY
Copyright © 2013 Techno-Control Cybernetic Inc, All rights reserved/Tous droits réservés.
Webdesign: Denis Labrosse.