Capacitive discharge stud welders (various models) |
|
|
NEW Resistance Welders -
Stud welder
|
 DESCRIPTION
- Cost-effective power unit for a wide range of capacitor discharge
studwelding applications (gap- and contact-welding) - Especially suited for problematic surface e.G. galvanized sheets) - Compact and very strong metal housing to withstand rough conditions on job
sites - Protection for high voltage fluctuations (-25% up to 20%) - Different stud welding guns are available depending on the welding range required, the material and the stud length used. - Easy to operate. Fine adjustment of charging voltage through arrow
keys (corresponds to energy setting) - Library function, automatic preset of charging voltage by selection of the
stud metric diameter - Self control increases electrical safety - Electronic protected solenoids
- Automatic switching off at overheating - Easy control of all functions by LED indications - Alternation of polarity can be done for extreme difficult materials
(normal is + ground, - gun)
Type |
Model 1.500 WS |
Model 2.400 WS |
Model 3.200 WS |
Welding range: Dia. [mm] |
M3 to M8 dia. 2 to 8 mm |
M3 to M8 (M10) dia. 2 to 10 mm |
M4 to M10 dia. 4 to 10 mm |
Welding material: |
Mild steel, stainless
steel, aluminum and brass |
Welding rate (Studs/min) : |
8 to 20 studs/min. (depending on application
and stud dia.) |
Capacitance: |
66.000 µF |
99.000 µF |
132.000 µF |
Welding time: |
1 to 3 msec. |
Energy: |
1.500 WS |
2.400 WS |
3.200 WS |
Charging voltage: |
50 to 220 V (stepless
voltage regulation up and down) |
Power source: |
Capacitor |
Primary power: |
230/115 V, 50/60 Hz, 10
AT |
Insulation class: |
IP 23 |
Dimensions [mm]: L x W x H |
420 x 180 x 250 mm (without handle) |
510 x 180 x 250 mm (without handle) |
510 x 180 x 250 mm (without handle) |
Weight [kg]: |
17 kg |
21 kg |
22 kg |
All information contained herein is subject to change without notice. The images showed might differ from the actual machines.
|